Page 1 of 5 123 ... LastLast
Results 1 to 10 of 42
  1. #1
    Join Date
    Feb 2009
    Location
    Jakarta, Indonesia
    Posts
    968

    Thumbs up == [Jual] iPod Shuffle, Nano, Classic & Touch ==

    Treath Closed
    Last edited by kantongkresek; 11-07-2011 at 04:19.

  2. #2
    Join Date
    Feb 2009
    Location
    Jakarta, Indonesia
    Posts
    968

    Thumbs up

    iPod shuffle (3rd Generation)



    Technical Specifications
    Size and Weight

    Height:
    1.8 inches (45.2 mm)
    Width:
    0.7 inch (17.5 mm)
    Depth:
    0.3 inch (7.8 mm)
    Weight:
    0.38 ounce (10.7 grams)5
    True volume:
    0.26 cu inches / 4,326 cu mm

    Audio

    * Skip-free playback
    * Audio formats supported: AAC (16 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV

    Capacity

    * 4GB flash drive1
    * Up to 1,000 songs in 128-Kbps3
    * AAC format

    Battery

    * Rechargeable lithium polymer battery
    * Playback time: Up to 10 hours when fully charged6

    Input and Output

    * 3.5-mm stereo headphone jack
    Last edited by kantongkresek; 14-11-2009 at 23:33.

  3. #3
    Join Date
    Feb 2009
    Location
    Jakarta, Indonesia
    Posts
    968

    Thumbs up

    iPod nano (5th Generation)




    Technical Specifications
    Size and Weight


    Height:
    3.6 inches (90.7 mm)
    Width:
    1.5 inches (38.7 mm)
    Depth:
    0.24 inch (6.2 mm)
    Weight:
    1.28 ounces (36.4 grams)

    Display

    * 2.2-inch (diagonal) TFT display
    * 240-by-376-pixel resolution at 204 pixels per inch


    Capacity

    * 8GB or 16GB flash drive1
    * Holds up to 2,000 or 4,000 songs in 128-Kbps AAC format3
    * Holds up to 7,000 or 14,000 iPod-viewable photos3
    * Holds up to 8 hours or up to 16 hours of video3

    Audio

    * Frequency response: 20Hz to 20,000Hz
    * Audio formats supported: AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), HE-AAC, MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV
    * User-configurable maximum volume limit


    Video

    * H.264 VGA video, 640 by 480 pixels, up to 30 frames per second with AAC audio
    * 15 real-time special effects: Sepia, Black and White, X-Ray, Film Grain, Thermal, Security Cam, Cyborg, Bulge, Kaleido, Motion Blur, Mirror, Light Tunnel, Dent, Stretch, and Twirl
    * H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats


    * Built-in rechargeable lithium-ion battery
    * Playback time
    o Music playback time: Up to 24 hours when fully charged
    o Video playback time: Up to 5 hours when fully charged
    Audio: 24 hours. Video: 5 hours. Recording Video 1.5 hours.
    * Charging via USB to computer system or power adapter (sold separately)
    o Fast-charge time: about 1.5 hours (charges up to 80% of battery capacity)
    o Full-charge time: about 3 hours



    In the box

    * iPod nano
    * Earphones
    * USB 2.0 cable
    * Dock adapter
    * Quick Start guide

  4. #4
    Join Date
    Feb 2009
    Location
    Jakarta, Indonesia
    Posts
    968

    Thumbs up

    iPod Classic




    Technical Specifications
    Size and Weight

    Height:
    4.1 inches (103.5 mm)
    Width:
    2.4 inches (61.8 mm)
    Depth:
    0.41 inch (10.5 mm)
    Weight:
    4.9 ounces (140 grams)

    Display

    * 2.5-inch (diagonal) color LCD with LED backlight
    * 320 by 240 pixels at 163 ppi

    Capacity

    * 160GB hard drive2
    * Holds up to 40,000 songs in 128-Kbps AAC format3
    * Holds up to 25,000 iPod-viewable photos4
    * Holds up to 200 hours of video5
    * Stores data via USB hard drive


    Audio

    * Frequency response: 20Hz to 20,000Hz
    * Audio formats supported: AAC (16 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV.

    Video

    H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Battery2

    * Built-in rechargeable lithium ion battery
    * Up to 36 hours music playback when fully charged
    * Video playback time: Up to 6 hours when fully charged

    Input and Output

    * Dock connector
    * 3.5-mm stereo headphone jack



    iPod touch (3rd Generation)

    .


    Size and weight

    Height:
    4.3 inches (110 mm)
    Width:
    2.4 inches (61.8 mm)
    Depth:
    0.33 inch (8.5 mm)
    Weight:
    4.05 ounces (115 grams)1

    Display

    * 3.5-inch (diagonal) Multi-Touch color LCD
    * 320 by 480 pixels at 163 ppi

    Capacity

    * 8GB, 32GB, or 64GB flash drive1
    * Holds up to 1,750, 3,500, or 7,000 songs in 128-Kbps AAC format5
    * Holds up to 10,000, 20,000, or 25,000 iPod-viewable photos5
    * Holds up to 10 hours, 20 hours, or 40 hours of video5

    Audio

    * Frequency response: 20Hz to 20,000Hz
    * Audio formats supported: AAC (16 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV

    Video

    H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats.
    Battery6

    * Built-in rechargeable lithium ion battery
    * Music playback time: Up to 36 hours when fully charged
    * Video playback time: Up to 6 hours when fully charged

    Input and Output

    * Dock connector
    * 3.5-mm stereo headphone jack

    Wireless3

    * Wi-Fi (802.11b/g)
    * Nike + iPod support
    * Maps location based service7iTunes
    Last edited by kantongkresek; 14-11-2009 at 23:35.

  5. #5
    Join Date
    Feb 2009
    Location
    Jakarta, Indonesia
    Posts
    968

    Thumbs up

    New BlueTech Travel Charger (AC to DC Wall Adapter)



    (compatible for Cowon MP3, SanDisk Sansa, Samsung MP3 Player, Phillips Mp3 Player, iPod Classic, iPod Nano Chromatic, iPod Shuffle, iPod Touch, iPod Video, Fiio S3 Card Reader Speaker, Fiio N3 Notebook Speaker, Fiio E5 Portable Amp)
    Last edited by kantongkresek; 14-11-2009 at 23:49.

  6. #6
    Join Date
    Feb 2009
    Location
    Jakarta, Indonesia
    Posts
    968

    Thumbs up

    Verythingpod 4 USB Power Dapter (AC to DC Wall Apater)






    (compatible for Cowon MP3, SanDisk Sansa, Samsung MP3 Player, Phillips Mp3 Player, iPod Classic, iPod Nano Chromatic, iPod Shuffle, iPod Touch, iPod Video, Fiio S3 Card Reader Speaker, Fiio N3 Notebook Speaker, Fiio E5 Portable Amp)
    [/CENTER]

  7. #7
    Join Date
    Feb 2009
    Location
    Jakarta, Indonesia
    Posts
    968

    Thumbs up

    Is a headphone amp necessary?

    The answer is absolutely yes. Some hear the differences immediately; some need more time to train their ears and brains. In either case, once the differences are heard, there is no way back.

    In the view of an amp, headphones can be categorized as efficient or inefficient, high or low impedance. Inefficient phones, low or high impedance, cannot be driven to enough volume by weak portables. There is no doubt that these phones need an amp. AKG 240 and 1000 and ER4S are the most popular inefficient phones.

    Although efficient phones can be driven to acceptable volume by portable players, this does not necessarily mean the sound is good enough. 10mW output capacity, typical to portables, is simply too weak. The most popular efficient headphones are Sennheiser HD-580, Koss KSC-50, Grado 60 and Etymotic ER4P. When you plug these phones right into a portable player, they sound actually pretty good, but there are still some important things missing.

    There is a misleading comment you see everywhere: low impedance headphones such as Grado 60 (32 ohm) and ER4P (27 ohm) do not need an amp and high impedance phones like the HD-580 (300) do need an amp. Wrong, they all need an amp, and, Grado 60 and ER4P are much harder to drive by an amp than HD-580!

    Let's look at Tangent's benchmark tests for PPA amps here:

    http://www.tangentsoft.net/audio/ppa/amp/bench

    Comparing the benchmarks between 1 and 4 buffers, one can easily see: to drive Grado 60 with adequately low THD, IMD and crosstalk, the PPA amp needs 4 stacked buffers while only one buffer is adequate for driving a pair of HD-580. My own benchmarks show the same - low-impedance phones are far more harder to drive. Surprise? Why?

    Because, low impedance phones like the Grado 60 need lots of current. When providing high current, an amp tends to generate much more nonlinear distortions, which are reflected in THD and IMD data, and crosstalk between channels. When load impedance is low, an amp's output impedance should be low too. This is obvious. The output ground resistance must keep extremely low, especially at high frequency, otherwise channel crosstalk will go too high. Stacked buffers can provide multiplied higher current capacity and lower output resistance and therefore improve benchmarks and sounding.

    You see, even a super amp like PPA needs lots of efforts to drive a pair of Grado 60 and ER4P that are considered (falsely) as easy-to-drive phones, how well those 10mW portables do? When you plug your ER4P into your iPod, for example, you hear no bass, because for low frequency signal, current requirement is even far more higher. This is why, even though iPod and most other modern portables all have flat 20-20k Hz frequency responses on paper. They simply cannot generate enough juice (current) into these phones, especially for bass.

    Does this mean high impedance phones like the HD-580 do not need an amp? No. For example, when you plug a pair of HD-580 into an iPod, they sound pretty good. But there are still at least two things missing here. When an amp drives low impedance phones, current capacity and output (including ground line output) impedance play the most important roles there as described above. When driving high impedance phones, current and impedance facts are relatively of less dominance, but high voltage swinging performance rules here. First, the amp must be able to swing between very high voltage rails to produce enough volume before clipping occurs. If the amp does not have enough voltage headroom, you'll hear clippings when music comes to the loudest scenes. Second, how fast the amp swings (slew rate). If it is too slow, then a fast violin stroke, for example, won't be able to break your heart. Many people complain that HD-580s do not have the same impacting of Grado 60. Actually it is their amp's fault - slew rate is too low. The 300 ohm HD-580 requires far wider voltage swings than the 32 ohm Grado 60 does; therefore, high slew rate becomes very critical.

    Most portables work at very low voltage (1.5v to 4.5v) and they cannot do neither of these two things well: the magnitude and velocity of voltage swing. When you plug a pair of HD-580 right into an iPod, the sound is pretty good (low noise and distortion), but you are not going to feel any power and heart-breaking strikes.

    There are many other technical details, but most people do not need to know them as they do not design or make amps, but above is the most important aspects and are enough to show how necessary good headphone amps are to headphones.

    Now you may say: okay, an amp sounds better, but does it worth the money and the carrying hassle?

    Good point, that's exactly why I make these affordable and extremely portable and battery-friendly amps. I'm also making an MP3 player that has a build-in hi-end amp.

    You may ask: how can the SuperMini, which uses only 3 batteries, drive HD-580?

    Good question. Unlike other amps that can use only 2V out of 4.5V to drive headphones, SuperMini can use all the 4.5V to drive headphones. SuperMicro uses the same rail-to-rail buffers to drive headphones with all available voltage.

    Really, no any headphones that do not need an amp? There are, such as those $10 or more Sony, Panasonic and Philips. However, not that they are good enough, but too bad - don't waste your amp and money for them. As I always say, try a pair Koss KSC50 first for only $17, no matter "who you are, where you're from, what you did, as long as you love" music. They sound good enough without, but still better with an amp.


    Mini Headphones Amplifier dbE Acoustics PA-20 / FiiO E3



    Description:

    The E3 is a headphone amplifier, it is designed to improve the sound quality of MP3 MP4 Players, Computers or Mobile Phones when using earphones or headphones. It saves your player battery and lengthens the play time when playing music.
    It’s not about Volume but Quality. A great pair of headphones can change you're listening experience--but only if they are driven well and properly powered. Put an E3 Headphone Amplifier between your music source and your favourite pair of headphones or earphones for an awesome personal listening experience right between your ears.

    Features

    l Designed for high impendence and low sensitivity headphones, with bass boost function;
    l Small and easy to carry and use in the outdoors;
    l Increase your music player's play time;
    l Uses only one AAA battery, for 20 hours playtime.

    Specifications:
    Output Power 70 mW (32 ohms Loaded)
    12 mW (300 ohms Loaded)
    Signal to Noise Ratio >= 90 dB (A Weight)
    Distortion < 0.05% (10 mW)
    Frequency Response 10 Hz - 40 kHz
    Suitable Headphone Impedance 16 ohms - 300 ohms
    Weight 11 grams (without battery)
    Power Supply 1 AAA Battery
    Dimensions 55 mm x 23 mm x 14.5 mm

    Reviews from the famous headphone forum "Head-fi"
    http://www.head-fi.org/forums/f5/fiio-amps-323979/
    Reviews from the famous headphone forum "anythingbutipod"
    http://www.anythingbutipod.com/archi...ini-review.php
    Reviews from the famous forum "isyougeekedup"
    http://www.isyougeekedup.com/fiio-e3...-7-well-spent/

    TechPowerUp Review of FiiO E3 - 9/10

    "No other amp on the market comes even close to matching the price performance ratio of the FiiO E3. For a budget portable setup you have got to look long and hard to find a worthy competitor. The sound quality is really good and it does a good job with raising the volume."
    Last edited by kantongkresek; 14-11-2009 at 23:52.

  8. #8
    Join Date
    Feb 2009
    Location
    Jakarta, Indonesia
    Posts
    968

    Thumbs up

    Mini Headphones Amplifier FiiO E5



    Description :
    A pocket sized headphone amp designed to improve sound quality and boost volume (if required) when listening with headphones or earphones to an MP3 player (such as the iPod), computer, mobile phone or other portable devices. The FiiO E5 also reduces battery drain on portable devices, which means you can enjoy your music for longer.

    Building on the strengths of the revolutionary FiiO E3 budget headphone amp, the FiiO E5 comes completely upgraded inside and out. With a specification improved in all the key areas to ensure the cleanest audio signal possible and a sleek new case to fit in with the latest MP3 players, the FiiO E5 is a dramatic upgrade from the previous model.

    The FiiO E5 is a dedicated headphone power amplifier made to upgrade your portable listening experience. Portable devices often have headphone outputs without sufficient power and find it difficult to drive many headphones and earphones. With the FiiO E5 you can ensure you are getting the best out of your portable audio setup.

    The FiiO E5's sound signature adds depth to the bass and enhances detail of trebles, making the E5 is a worthy upgrade to any portable audio setup.

    Simply connect the FiiO E5 between your portable audio device and headphones for the ultimate mobile listening experience.

    Output Power : 15mW (16 ohm Loaded) 16mW(320 ohm Loaded)
    SNR : >= 95dB (A Weight)
    Distortion : <0,009% (10MW)
    Frequency Response : 10Hz~100KHz
    Headphone Adaptation Impedance : 16 ohm~300 ohm
    Weight : 30grm
    Power Supply : Built-in Rechargeable Li-ion Battery
    Dimensions : 44.2mmX38mmX12,6mm[/center]

    Mini Headphones Amplifier FiiO E5 Video Review
    [youtube]<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/Weh0JodQn_c&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Weh0JodQn_c&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>[/youtube]

    TrustedReviews.com 'Recommended'

    "The output seems cleaner and brighter, with a pleasant, rich tone in the mid and upper range. Sound is much richer and more lively than it was, and the results with classical music are nigh on dazzling."

    "Solid audio output for such a ludicrously cheap headphone amp. While your mileage will vary depending on your 'phones, its well worth giving the E5 a try if you find your existing setup lacks power."

    TechPowerUp Review of FiiO E5 - 9.5/10

    "If you are looking for a warm and cozy sounding amplifier you should definitely consider the E5; add the fact that it has an integrated Li-ion battery that can be charged through a mini-USB cable and you have quite a nice package."

    GoodGearGuide FiiO E5 Review - 4.5/5

    "For the price, there is nothing that can beat the E5's sound-boosting capabilities. For such a small device to add a significant amount of bass and have such a long battery life is very impressive indeed."speakermp3-player-review.php[/url]

  9. #9
    Join Date
    Feb 2009
    Location
    Jakarta, Indonesia
    Posts
    968

    Default

    FiiO iPod Line Out Dock









    Fungsi :
    - sebagai docking iPod untuk speaker anda.. menyalurkan kualitas suara terbaik dari iPod
    - sebagai feeder untuk headphone amplifier.

    Coba kualitas suara terbaik dr ipod dengan Line Out Dock.

  10. #10
    Join Date
    Feb 2009
    Location
    Jakarta, Indonesia
    Posts
    968

    Thumbs up

    [CENTER]Fiio E1, Control iPod Headphone Amp







    FiiO E1 is a headphone Amplifier specially design for use with Apple's iPod and iPhone. It's first headphone amplifier in the world with in line remote control fuctions (Next, Volume Up, Play/Pause, Volume Down, Previous)
    The FiiO E1 has a built in high quality headphone ampilier IC manufactured by Texas Instruments.
    The FiiO E1 uses the line out signal fom the iPod/iPhone, so it provides better sound quality and is able to drive high or high impedance or low sensitivity headphones with the in line control funtion you can easiliy control the playback oh the iPod/Iphone from the E1 Ampilifier.
    The FiiO E1 will bring you better sound quality and more convenient playback experience!

    Feature:
    ●Design for iPod/iPhone
    ●Improves the sound quality with the line out from the dock
    ●Build in high quality Texas Instrument's headphone AMP IC
    ●High Power Output to drive high impedance or low sensitivity headphones or earphones.
    ●Easy control of the playback of the iPod/iPhone while the player stay securely in your pocket.
    ●Compatible with iPod Nano, iPod Video, iPod Touch, iPhone all generations & all versions
    ●Easy and simple to use, plug and play.
    ●Powered by iPod/iPhone (No charging or battery needed)
    ●Traditional Apple white style with a built in clip, you can clip it onto anything


    Spec
    ●Output power: 80 mW (32 ohms Loaded) / 16 mW (300 ohms Loaded)
    ●Signal to Noise Ratio: >= 95 dB (A Weight)
    ●Distortion: < 0.009% (10 mW)
    ●Frequency Response: 10 Hz - 60 kHz
    ●Suitable Headphone Impedance: 16 ohms - 300 ohms
    ●Power Supply: use iPod / iPhone power
    ●Dimensions: Line control 48mmx14mmx10.7 mm
    ●End-to-End: 845mm
    ●Cable length: 780mm


    [Pictorial Review] FiiO E1

    http://www.head-fi.org/forums/f105/p...iio-e1-448364/

Similar Threads

  1. Replies: 803
    Last Post: 26-03-2013, 08:53
  2. Replies: 879
    Last Post: 17-11-2011, 22:03
  3. [Apple Event] 09/09/09 : It's Only Rock and Roll But We Like it
    By gadgetman in forum Semua tentang iPhone
    Replies: 115
    Last Post: 16-09-2009, 00:29

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •